Balmer Lawrie & Co Ltd

  • Pull up Oil
  • Chrome - Aluminium Syntan
  • Synthetic Tanning Agents
  • Fillers
  • Degreasing Agents
  • Enzymes
  • Chrome Tanning Auxiliaries

Balfin® BL Wax (SPL)

CharacteristicsHard wax for Oil and Wax type of articles

Active Matter %100

AppearanceWhite solid

Melting Point 58 ± 2 °C

Application & Properties‘Balfin® BL Wax (SPL)’is a hard synthetic wax specially designed for upgradation with pull up effect on snuffed and full grain leather. This product provides a dark rich surface with pull up effect and also while plating at the temperature of above 70°C will darken the surface considerably. his productcan be applied two light coats and then one heavy coat to get uniformity on leather in a molten condition by heated roller coater having the temperature of 70°C. For better results the leather is to be heated before and after each coat to enhance wax penetration. This product can also be mixed with other waxes & oils to get medium soft film surface. The dosage of BL Wax (SPL) will vary based on the requirement of the effect. This product also helps to firm up and tighten the grain break on soft and loose grain leather. While finishing the leathers, pretreated with wax/oil or wax + oil mixtures special care and adhesion tests must be done.

SafetyA non-hazardous industrial chemical should be handled with normal care. Any contact with eyes or spillage on skin should be washed thoroughly in running water immediately. If irritation or redness persists, seek medical attention. For contact with molten material, gently open eyelids and flush affected eye(s) with cold water. Seek immediate medical attention.

StorageThis product has 24 months shelf life when stored in original packing in sealed condition at ambient temperature. Protect from moisture & sunlight.

 Balfin® BL Wax (SPL)

News & Events

Quick Links